From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposal to replace a charring fibre washer with a paper one in the serrated type magneto drive.
| Identifier | ExFiles\Box 76\2\ scan0189 | |
| Date | 9th September 1921 | |
| Mr. Shelton from BY.{R.W. Bailey - Chief Engineer} c. to EP.{G. Eric Platford - Chief Quality Engineer} c; to Hs.{Lord Ernest Hives - Chair} X.3699 BY6/P9.9.21. X.3530 - FIBRE WASHER IN SERRATED TYPE MAGNETO DRIVE. X.3699 In view of the fact that the present fibre washer chars up during the dynamometer run on the engine, it is quite useless fitting this type of washer as a standard. We agree that it has stood up on the experimental car, but we are certain that in this case the fibre washer has never been under the rigorous conditions imposed by running the engine and car on the dynamometer. Under these conditions, therefore, I propose to fit a paper washer in place of the fibre washer referred to. If the Expl: Dept: have any objection to this will they kindly let me know. BY.{R.W. Bailey - Chief Engineer} | ||