From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Noise issues from servo gears within the four-wheel brake system.
Identifier | ExFiles\Box 73\3\ scan0088 | |
Date | 19th June 1924 | |
R.R. 496A (20H) (D.A. 652 20-8-24) J.H.D. 19940 9940 Expl. No. 9910 REF: Hs{Lord Ernest Hives - Chair}3/LG19.6.24. EXPERIMENTAL REPORT. To R.{Sir Henry Royce} from Hs.{Lord Ernest Hives - Chair} c. to CJ. RG.{Mr Rowledge} c. to DA.{Bernard Day - Chassis Design} E.{Mr Elliott - Chief Engineer} c. to BY.{R.W. Bailey - Chief Engineer} WOR.{Arthur Wormald - General Works Manager} SECRET - FOUR WHEEL BRAKES. NOISE FROM SERVO GEARS. We have recently tested a set of worm gears which were cut with a specially made hob. On the road these gears were equally as noisy as the previous gears, in fact, if anything they were worse for noise. We find, however, that the degree of noise does vary on different gears when similarly made. We do not think there is the least chance of getting Sales to accept cars until we get rid of the gear noise. Standard Gearboxes are condemned for much less noise. On some of the cars also the noise is bad - it can be heard without any load at all on the brake pedal. The noise we get is a definite period - we should say that it is a torsional vibration in the servo drive. It comes on and off at definite speeds. It definitely does not originate from the engine because it can be obtained with the engine stopped and the car coasting. We have removed the back axle and universal joint and have still been able to get the same noise with the car in the Shop. There is a possibility, seeing that the engine is then driving, that the vibrations might come from the engine under that condition. We suggest that we alter the ratio of the worm and also alter the ratio of the spur gears so that although we have the same xxxxxxxxxxxxxxxxxxx contd :- | ||