From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design change to the filter in hydraulic shock dampers.
| Identifier | WestWitteringFiles\V\October1930-February1931\ Scan169 | |
| Date | 24th December 1930 | |
| R.{Sir Henry Royce} FROM DA.{Bernard Day - Chassis Design} Copy to SS.{S. Smith} " BY.{R.W. Bailey - Chief Engineer} " HS.{Lord Ernest Hives - Chair} RECEIVED DEC 1930 ORIGINAL HYDRAULIC SHOCK DAMPERS. DA{Bernard Day - Chassis Design}1/M24.12.30. x 7520. x 5520. x 235, Attached herewith is a print of N. sch. 3190., (original to BY.{R.W. Bailey - Chief Engineer}) shewing hydraulic damper with vertical pistons. The only point in which we think we have departed from instructions is the filter. We have returned to the circular type as it appears very difficult to get in a flat one of sufficient dimensions. Formerly we found it difficult to get in the circular filter when the passage was on the lever side. Now that it has gone over to the other side the problem is easier. The damper as drawn appears as though it would be suitable for both front and rear 25H.P., and rear Phantom 2. We have not applied the brakes to the rear axle as we have assumed that it will be issued to test the principles first. DA.{Bernard Day - Chassis Design} | ||