Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
From W.H. Reynolds & Co. enclosing sample rivets made from a 10% gold and 90% silver alloy.

Identifier  ExFiles\Box 64\3\  scan0008
Date  2nd October 1924
  
X8650
999
MEMO. FROM W. H.{Arthur M. Hanbury - Head Complaints} REYNOLDS & Co.
(RICHARD JOHN DINGLEY, PROPRIETOR.)
KEY HILL DRIVE, BIRMINGHAM.
SPECIALISTS IN IGNITION CONTACTS, PRECIOUS METAL DEALERS, ETC.
TELEPHONE CENTRAL 1472
TEL: NORTHERN 1472.
2nd October 1924
Ref. No. R/ 999

Messrs Rolls Royce Ltd.
Derby

Gentlemen,

Re our Mr Dingley's conversation with your Mr Royce on the B'ham Metal exchange this afternoon.

We have much pleasure in enclosing the sample Rivets in solid 10% Gold 90% Silver Alloy, made by hand, of course quantities would be made in tools, also we have enclosed one rough finished rivet fitted to a piece of hack saw blade, this, as explained to Mr Royce, was done very roughly to show that they are easily rivetted, should you experience any difficulty in fixing same we have no doubt, but what we could fix them satisfactorily as we have the type of press and tools suitable for this operation.

We have enumerated previously on the allround superiority of the solid rivet over the brass and alloy faced.

We trust therefore that our samples are satisfactory, and that we may receive your esteemed orders, which shall have our prompt attention.

We are Gentlemen,
Faithfully yours,

W. H.{Arthur M. Hanbury - Head Complaints} Reynolds & Co.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙