Parts for fitting Bentley 50 pressed steel wheels onto a B.11A rear axle.
| Identifier | ExFiles\Box 112\2\ scan0014 | |
| Date | 26th January 1938 | |
| HPS {Horace Percy Smith - Experimental Factory Mgr} c. Rm. {William Robotham - Chief Engineer} c. Rm {William Robotham - Chief Engineer} /Gry. {Shadwell Grylls} c. Rm {William Robotham - Chief Engineer} /AFM. {Anthony F. Martindale} 1044 BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} 10/G.26.1.38. 856 BENTLEY 50 - PRESSED STEEL WHEELS ON B.11A. REAR AXLE - SECTION 6120. Please receive herewith two blueprints of each of the following :- Ex.S.388 Rear Axle Shaft. R.H. 1 off. Ex.S.389 " " " L.H. 1 off. The following parts will not be required :- GB.1350 Washer 2 off. GB.2963 Rear Axle Shaft R.H. 1 off. GB.2964 Rear Axle Shaft L.H. 1 off. KB.3601 Castle Nut 2 off. K. {Mr Kilner} 4614 Split pin. 2 off. Remaining details are to LOP. GB.3032. The above are in accordance with memo Rm {William Robotham - Chief Engineer} /Gry. {Shadwell Grylls} 11/MH. {M. Huckerby} 9.12.37. instructing bentley 50 pressed steel wheels to be tried on Bentley 11A. in order to judge the appearance. Kindly instruct one set. ael BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).