Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Recommendations for oil supply and pressure for crankshafts using grooveless bearings.

Identifier  ExFiles\Box 14\2\  Scan010
Date  8th May 1928 guessed
  
contd :- -3-

We recommend in all cases where grooveless bearings are employed that the crankshaft journals be provided with three holes equally spaced to supply oil to the big end bearings and that suitable relief valve springs be fitted to raise the main oil pressure to between 60 lbs/sq.in. and 100 lbs/sq.in. The higher pressure springs should be tried out initially and determine the minimum permissible pressure is matter of experiment.

Hs{Lord Ernest Hives - Chair}/A.C.Lovesey.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙