From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of vehicle body faults and required modifications, page 2.
| Identifier | ExFiles\Box 98\1\ scan0210 | |
| Date | 24th April 1939 | |
| -2- Rm{William Robotham - Chief Engineer}/IMW.{Ivan M. Waller - Head of Chateauroux}1/MH.{M. Huckerby}24.4.39 (6) Rear doors. These are not draught tight round the wheel arches. Snow blew in badly during the winter running. Rubber sealing is required here. (7) Doors lock themselves too easily with combined handles and locks. Separate locks are to be used. (8) O.S.R. window winder failed. This is not a general fault but should be investigated when the body is examined. (9) Wheelarch support bracket bolts. These require to be reversed and the minimum number of washers used at the lower end of the floatex to give max. possible clearance for the rear road springs on full bump. (10) Centre pillar distorted at bottom hinges. This occurs from the reaction of the check strap when the door is wide open. Local reinforcement of the pillar is required. (11) Rubber strips on luggage platform. These are not satisfactory as they have come adrift. An alternative scheme is required. (12) Visibility in driving mirror poor. The standardised body will have a larger rear window than 8.B.V. The mirror position should be studied. Mr. Ward showed an interesting two mirror scheme on his Bentley. They do not consider it necessary to send 8.B.V. body to London when it is removed, but would like to send their representative to Derby to examine it, particularly the rear quarters under the trimming. We should notify them when it is ready. Rm{William Robotham - Chief Engineer}/IMW.{Ivan M. Waller - Head of Chateauroux} | ||