Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting the Experimental Department make a dummy model armature for the 'Goshawk II' motor and dynamo.

Identifier  ExFiles\Box 35\4\  scan 041
Date  10th August 1921
  
TO BY.{R.W. Bailey - Chief Engineer} from DA{Bernard Day - Chassis Design}/T.
Copy to HS.{Lord Ernest Hives - Chair}
EFC.

X4384
FC
AUG 12

DA{Bernard Day - Chassis Design}/T1/G10/8/21.

RECEIVED

X4384
X4383

RE "GOSHAWK II" MOTOR AND DYNAMO.
X1640

Would you please issue the necessary information to the Experimental Dept. to enable them to make up a dummy model armature complete with winding on each of the above machines, as per Mr. Royce's instructions.

The armature itself should be made of wood with the slots cut in and mounted on a rough spindle, then wound with the insulation and winding which we have already instructed to you.

The object is to see whether the winding can be got into the estimated space or not, etc., and we wish these armatures to be sent to "CamachaHenry Royce's office in West Wittering" as soon as possible.

Also please send further copies of the winding drawings on above windings for our information.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙