Rolls-Royce Archives
| Identifier | Entry | ||
| Axle Front-page1 | Design modification for the Wraith II front pivot due to an eccentric bore in the forging. | ||
| View original record | SECRET To: Mr. Copy to Mr. Rm. SMC. H-S. Haynes. E/EV.YN/N.6.1.37. 60D [Handwritten] Les. Get Correct Units on Bump Chassis. Rmy Wraith II Front Pivot. On the first Wraith II front pivots the bore for… | ||
| Axle Front-page2 | Instruction memo for the Experimental Department to produce six sets of Front Axle Roll Rods for the Wraith III. | ||
| View original record | 601. Cr. Dept. (Strikethrough) Pr. Dept. (Strikethrough) c. Hm. BY/HS.1/G.3.12.37. WRAITH 111. FRONT AXLE ROLL ROD. Will you please instruct the Experimental Department to produce six sets of the… | ||
| Axle Front-page3 | Parts and blueprints for the Wraith III chassis front axle needle roller lower pivot bearing. | ||
| View original record | 661 To. WHS. [REDACTED] [REDACTED] c. Bm/Hdy. BY/CHL.1/E.20.1.38. F/H. WRAITH III. CHASSIS. SECTION 7040. FRONT AXLE. P.D.97. Needle Roller Lower Pivot Bearing. Please receive herewith two blue prints… | ||
| Axle Front-page4 | Instruction memo for ordering new parts for a 10,000-mile car and six experimental chassis, along with blueprint distribution details. | ||
| View original record | (Cont'd). -2- Ry/CRL.1/E.20.1.38. The new pieces are for use on the 10,000 miles car and a further six sets should be ordered for the six experimental production chassis. These should not be fitted… | ||
| Axle Front-page5 | Instruction sheet detailing the replacement of a pivot bearing washer with a new outer race for the Wraith III chassis front axle. | ||
| View original record | Dsy/HRC. Cr-Sup/War. C. Suo/Lon. G. Rm/Hdy. 601 FJH HY/CRL.4/E.27.1.38. WRAITH III. CHASSIS. SECTION 7040. FRONT AXLE. FD.97. Needle Roller Lower Pivot Bearing. Please receive herewith two blue prints… | ||
| Axle Front-page6 | Technical memo regarding the requirement of a Washer Pivot Bearing for the Wraith III Chassis Front Axle. | ||
| View original record | To:- [Illegible] [Illegible] C. Rm/Bdy. 601 BPH BY/GRL.2/E.27.1.36. WRAITH III. CHASSIS. SECTION 7040. FRONT AXLE. P.D.97. Needle Roller Lower Pivot Bearing. Further to memo' BY/GRL.1/E.20.1.36.,… | ||
| Axle Front-page7 | The supply of blueprints for front axle 'Clevite' bushes for the Wraith model. | ||
| View original record | HOC Rm. Rm/PJH 601 BY/Ald.2/G.15.3.38. FRONT AXLE. WRAITH. SECTION 7040. Please receive herewith two blueprints of each of the following :- S.CD.501 "Clevite" bush Lower Pivot Bearing. Ex.S.601 Pivot… | ||