Test for a modified anti-jelly-ing scheme for engine mountings.
| Identifier | ExFiles\Box 28\5\ Scan050 | |
| Date | 28th February 1931 | |
| X 457 R. {Sir Henry Royce} FROM E. {Mr Elliott - Chief Engineer} E2/M28.2.31. C. to SG. {Arthur F. Sidgreaves - MD} WOR. {Arthur Wormald - General Works Manager} C. to HS. {Lord Ernest Hives - Chair} DA {Bernard Day - Chassis Design} /EV. {Ivan Evernden - coachwork} re. ENGINE MOUNTINGS. X.457. X.7005. Referring to EV {Ivan Evernden - coachwork} 's anti-jelly-ing scheme described in DA {Bernard Day - Chassis Design} /EV {Ivan Evernden - coachwork} 1/M27.2.31., we should like to make a test of this out in a somewhat modified form employing bell cranks and a push and pull rod for the parallel motion. Some provision would be required for taking care of the expansion of the crankchamber such as a link. There is still the difficulty remaining that we should be mounting the engine at 4 points in the frame, and also the mechanism may rattle due to reversal of load, but these difficulties might be overcome. E. {Mr Elliott - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).