Requirements for carrying out steering experiments on a test vehicle.
| Identifier | ExFiles\Box 28\2\ Scan019 | |
| Date | 22th July 1932 | |
| 84094. RHC. {R. H. Coverley - Production Engineer} From Hs {Lord Ernest Hives - Chair} /Gry. {Shadwell Grylls} Hs {Lord Ernest Hives - Chair} /Gry. {Shadwell Grylls} 7/MA.22.7.32. STEERING EXPERIMENTS. We wish to carry out some further tests on the Marles steering box. We first wish to set an impression of the car (22-EX) with standard steering. Will you therefore please fit low rating springs to the front of this car. Secondly we shall require an axle off 20-EX to be fitted so as to have ball bearing pivots. Finally we should like the Marles steering fitted with a P.II pendulum lever 7.750 CTS {C. Trot Salt - Carburation} and a P.II steering wheel. We should like this arranged so that the pendulum lever centres are unaltered. A special bracket will be required to fit this steering box in the frame. Also a substantial stay will be required from the steering column to the dash. A try out of this latter could be done on the bump chassis. Hs {Lord Ernest Hives - Chair} /Gry. {Shadwell Grylls} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).