Parts for a modification to the Bentley 50 brake system.
| Identifier | ExFiles\Box 111\3\ scan0215 | |
| Date | 19th July 1938 | |
| 806. To HPS. {Horace Percy Smith - Experimental Factory Mgr} c. Rm. {William Robotham - Chief Engineer} c. Rp/APM. BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} 16/N.19.7.38. BENTLEY 50. Sec: 6091 - Intermediate Shaft. Sec.6150 - Rear Brake Equaliser. Sec.6130 - Rear Brakes. Please receive herewith two prints of the following:- Sec.6091. ExS.891. Bush - Lever. 1 off. ExS.892. Pull Rod. 1 " Sec.6130. ExS.893. Brake Rod R.H. 1 off. ExS.894. " " L.H. 1 " Sec:6150. ExS.891. Bush - Lever. 1 off. ExS.895. Spherical bearing. 2 " The following parts will also be required for use with the above:- Sec.6150. G.84507. Jaw. 2 off. KB.4565. Pin. 2 " Sec.6091. KB.1180. Ferrule. 2 off. KB.4515. Pin. 2 " KB.1114. Jaw. 2 " These parts have been produced in order to provide a spherical ended rod for the Equaliser Brake Cross Rods and in order to replace the Brake Rope from the Inter: Levers to the Equaliser by a rod (Mr.Martindale's request). Cont'd. {John DeLooze - Company Secretary} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).