From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Replacement of four thin anchor plates with a new single thick anchor plate for the Bentley 50's rear brake equalisers.
| Identifier | ExFiles\Box 111\3\ scan0214 | |
| Date | 19th July 1938 | |
| 806 To: HPS.{Horace Percy Smith - Experimental Factory Mgr} c. Rm{William Robotham - Chief Engineer} c. Rm{William Robotham - Chief Engineer}/AFM.{Anthony F. Martindale} BY/Ald.{F. Allwood - Experimental Design}15/N.19.7.38. BENTLEY 50. -------- Sec: 6150 - Rear Brake Equalisers. ----------------------------- Please receive herewith two prints of the following:- ExS.896 - Anchor Plate. 1 off. The above part has been produced in order to replace the present type of 4 thin anchor plates with the one thick one ( Mr.Martindale's request). The parts at present used are replaced by the above as follows:- GB.3782 - Replaced by ExS.896. Kindly instruct two sets. BY/Ald.{F. Allwood - Experimental Design} | ||