Wheel nuts for a semi-floating axle and recommending modifications.
| Identifier | ExFiles\Box 98\1\ scan0137 | |
| Date | 20th December 1938 | |
| H02 also Hood To By. {R.W. Bailey - Chief Engineer} from Rm {William Robotham - Chief Engineer} /Gry. {Shadwell Grylls} c. Da. {Bernard Day - Chassis Design} c. Hdy. {William Hardy} c. Da {Bernard Day - Chassis Design} /Ev. {Ivan Evernden - coachwork} Rm {William Robotham - Chief Engineer} /Gry. {Shadwell Grylls} 3/MH. {M. Huckerby} 20.12.38. WHEEL NUTS FOR SEMI-FLOATING AXLE. The near side rear wheel of 9.B.V. has come loose. It is probable that the nuts were never sufficiently tight as on no occasion has a nut become loose on 8.B.V. The wheel in question was the same (N.S.R.) as came loose on a borrowed Chrysler. We shall therefore have to use handed wheel nuts. We recommend cap nuts like those on the armoured cars C.6754/5 marked with an arrow for removal. We believe By. {R.W. Bailey - Chief Engineer} recommended alum bronze for the nuts. Both modifications can be incorporated at once. Rm {William Robotham - Chief Engineer} /Gry. {Shadwell Grylls} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).