Instructions for producing oversize taper pins for gearboxes on 25/30-HP chassis.
| Identifier | ExFiles\Box 8\11\ 11-page150 | |
| Date | 13th December 1938 | |
| 628 To:- Roy. {Mr H. Royce - Buyer} (2 copies). c. RHC. {R. H. Coverley - Production Engineer} c. RHC {R. H. Coverley - Production Engineer} /wld. (O.T. Dept). c. RHC {R. H. Coverley - Production Engineer} /Cls. (4 copies):- c. C/S. c. LA {L. A. Archer} /Skn. c. Hd. {Mr Hayward / Mr Huddy} c. C/Rts. c. C/Mt. c. Kn {D. G. McKechnie - Sales} /Grys. c. RHC {R. H. Coverley - Production Engineer} /Mr. Turner. c. RHC {R. H. Coverley - Production Engineer} /SS. {S. Smith} BY {R.W. Bailey - Chief Engineer} /CRL. {C. R. Lisson} 2/E.13.12.38. 25/30-HP. CHASSIS. 1st. & 3rd. MOTION SHAFTS. SECTION 8040. Re. Material for Replacements on "A" Series (100 Sets) and "B" Series. (200 Sets). In accordance with information received from RHC {R. H. Coverley - Production Engineer} /SS {S. Smith} , it will be necessary to produce oversize taper pins in order to re-claim the Synchro-Mesh Outer Cone GW.771. from the first 300 Gearboxes. The following part will therefore be required. GW.2236. Taper Pin. 6 off per set. The piece at present instructed is replaced by the above as follows :- GW.1631. replaced by - GW.2236. Please receive herewith the following tracing, for issue to all Dept's. concerned. GW.2236. Taper Pin. 6 off per set. Kindly instruct. BY {R.W. Bailey - Chief Engineer} /CRL. {C. R. Lisson} Roy. {Mr H. Royce - Buyer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).