Uncomfortable accelerator pedal position on the Spectre model.
| Identifier | ExFiles\Box 92\1\ scan0200 | |
| Date | 18th November 1935 | |
| To E. {Mr Elliott - Chief Engineer} Spectre(Codename for Phantom III) Accelerator Pedal. I do not know whether I am peculiarly constituted, but I find the accelerator pedal position very uncomfortable on the Spectre(Codename for Phantom III). We agree that, as the attached blue prints show, there is not a very great deal of difference between the two cars, except that the leg is not supported well on the Spectre(Codename for Phantom III) due to the cushion being cut away on that side for the hand brake lever. When we come to the Stromberg carburetter, however, we should like to try out the ordinary type of accelerator pedal. The movement on the Packard is remarkably small. We appreciate that one of the difficulties with Spectre(Codename for Phantom III) has been that we wanted a lot of carburetter pull-off spring and this has necessitated a good travel to keep the breathers reasonably low. There is one factor about the Phantom III and that is that owing to its greater liveliness the throttle is more nearly in the closed position most of the time. This is the position in which we complain of discomfort and not the all out position. Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} Att: Rm. {William Robotham - Chief Engineer} 14 & Rm. {William Robotham - Chief Engineer} 15. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).