The lack of a proper detail drawing for clutch operating cross shaft modifications and proposing a new scheme.
| Identifier | ExFiles\Box 83\1\ scan0105 | |
| Date | 10th February 1936 | |
| To RHC. {R. H. Coverley - Production Engineer} x 200 a 4 Hs {Lord Ernest Hives - Chair} /Smth.11/KW.10.2.36. 6-B-IV. We understand that there has never been a proper detail drawing showing the modifications to the clutch operating cross shaft necessary to give the correct angularity when cantilever pedals to N.Sch.4156 are used. In the previous cases of 5-B-IV and B-23-AE the necessary modifications were made in the shop without drawings. In view of the congestion in G. {Mr Griffiths - Chief Accountant / Mr Gnapp} Dept. we suggest that a scheme is prepared in this department to show the correct position of the keyway, using a Borg & Beck clutch to GB.2099 and cantilever pedals to N.Sch.4156. Hs {Lord Ernest Hives - Chair} /Smth. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).