Agreement to fit a 10' Borg & Beck clutch to chassis B-10-DG.
| Identifier | ExFiles\Box 90\3\ scan0131 | |
| Date | 5th November 1935 | |
| To RHC. {R. H. Coverley - Production Engineer} x261d Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} 15/KW.5.11.35. Chassis B-10-DG. H. {Arthur M. Hanbury - Head Complaints} Thompson Esq. It has been agreed that we can fit a 10" Borg & Beck clutch to B-10-DG, my father-in-law's car. He has worn out two standard clutches completely in 7,000 miles. I am asking the Repair Dept. to send the engine over here so that we can do the job. There is a flywheel and first motion shaft available. The clutch we are allotting to the job is the non-ventilated one which has been prepared for B-19. We wanted a ventilated clutch fitting to B-19 in any case, and this has been ordered and should be available by the end of the week. Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).