List of new, replaced, required, and no longer required parts for the Phantom III chassis, specifically concerning Wraith II wheel movements.
| Identifier | ExFiles\Box 95\1\ scan0390 | |
| Date | 5th April 1937 | |
| BY {R.W. Bailey - Chief Engineer} /Cgh. {W Clough} BY {R.W. Bailey - Chief Engineer} /HEB {H. Biraben} 16/M.5.4.37. PHANTOM III CHASSIS. FRAMES AND FITTINGS SEC:7000. STEERING COLUMN AND BOX SEC: 7050. SIDE STEERING TUBE - SEC:7070. NEW AND REPLACED PARTS ENTAILED BY WRAITH II. WHEEL MOVEMENTS ON PH:III. As requested, herewith a list of parts to suit the above, as far as this Dept., is concerned.- SEC:7000.- F.88876 Modification to Frame Side Member Drilling. SEC:7050.- F.89442 Rocking Shaft. 1 off,replacing F.88341. F.89443 Steering Cam(.700 Lead)LH. {Mr Haworth} 1 " " F.87551. F.89444 Cam Roller(.004 Oversize). 1 off,replacing F89038-40.&F89010 F.89445 Inner Bearing(Cam Roller). 2 off,replacing F.87130. F.89446 Bolt for Roller Race. 1 " " F.87135. F.89447 Assembly of Cam Roller. 1 " " F.88212. F.89448 Adj:Shim(Cam Roller).002 } 4 off,to suit,replacing) F.89449 " " ( " ).003 } F.87132/3 and F.88146/7). SEC:7070.- F.89439 Ball Pad(LONG). 1 off,replacing F.60082. F.89440 " " (SHORT). 1 " " F.60083. F.89441 Spring(Side Steering Rear Joint).2 " " F.60084. The following existing part will also be required.- SEC:7050.- Cam Bearing Race(Timken)31C & 32X. 2 off. The following parts are NO longer required.- SEC:7050.- F.87134 Distance Piece. 1 off. F.87752 Roller Bearing Cage. 2 " F.88213 Roller Race for Cam. 2 " BY {R.W. Bailey - Chief Engineer} /HEB {H. Biraben} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).