List of equipment and specifications for a test setup, continued from a previous page.
| Identifier | ExFiles\Box 143\1\ scan0230 | |
| Date | 30th October 1936 guessed | |
| - 3 - (3) Contd. It enables us to be nearer car conditions and be able to take water flows and heat flows without any further set up. We will forward a sketch of this. (4) Outside silences similar to No. 30. (5) DPX4 dynamometer B10275 which is at Heenan and Froude's for overhaul. (6) 2 outside petrol tanks with connections to run on either tank. (7) a. {Mr Adams} B & B mark IX Flowmeter reading 32-123 pts/hr. on left hand side. 54-210 pts/hr. on right hand side. b. B & B mark VIII Flowmeter reading. 4-15 pts/hr. on left hand side. 12-42 pts/hr. on right hand side. Regulating floatchamber and filter in connection with the above. (8) Bench with one vice. (9) One Art Metal Cupboard. (10) 3 Negretti and Zambra thermometers 0 - 160°C with 8 ft. of transmitting tube. (11) 1 Hopkinson pressure gauge 0 - 20 lbs. sq.in. " " " 0 - 50 lbs. sq.in. " " " 0 -100 lbs. sq.in. complete with units and nipples. (12) 3 Oil Storage tanks B7411 from J. {Mr Johnson W.M.} Ash Ltd. with stand to suit. (13) Set of measures and 2 trays. (14) 2 Jaegar rev. counters. (15) 1 Hasher " " (16) 1 Steam Radiator. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).