Parts required to fit new propeller shafts with increased diameter joints to the 25/30-HP chassis.
| Identifier | ExFiles\Box 9\2\ 02-page25 | |
| Date | 30th November 1938 | |
| 637 BY {R.W. Bailey - Chief Engineer} /CRL. {C. R. Lisson} 2/E.30.11.38. To. RHO. c. RHO/Mr. Pritchard. c. RHO/Mr. Turner. c. LA. {L. A. Archer} c. BY {R.W. Bailey - Chief Engineer} /RS. {Sir Henry Royce's Secretary} c. G {Mr Griffiths - Chief Accountant / Mr Gnapp} /Rb. {R. Bowen} c. Roy {Mr H. Royce - Buyer} /Ms. c. RHO/JMW. c. Rm {William Robotham - Chief Engineer} /Gry. {Shadwell Grylls} c. G {Mr Griffiths - Chief Accountant / Mr Gnapp} /Wt. Wraith 25/30-HP. CHASSIS. 1st. & 3rd. MOTION SHAFTS. SECTION 6040. PROPELLER SHAFT & UNIVERSAL JOINT. SECTION 6110. REAR AXLE. SECTION 6120. In accordance with memo' BY.5/G.29.11.38., new Propeller Shafts with increased diameter joints are to be fitted to the Second 100 Chassis in "B" Series. The following parts will therefore be required :- Sec.6040. GW.2187. Coupling Flange. 1 off. KB.2964. Lockwasher. Coupling Flange. 1 " Sec.6110. GW.2189. Propeller Shaft. 1 off. D.54141. Bolt./Coupling Flanges. 8 " K.4319. .4375 Lock Nut. 8 " K.4511. Grover Washer. 8 " Sec.6120. GW.2188. Driving Flange. 1 off. KB.2965. Lockwasher. 1 " The pieces at present used are replaced by the above as follows :- Sec.6040. GW.2026. replaced by - GW.2187. GW.334. " " - KB.2964. -1- | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).