Confirming satisfaction with a high phosphorous cylinder liner material and suggesting a trial production run.
| Identifier | ExFiles\Box 132\4\ scan0124 | |
| Date | 10th February 1938 | |
| RHC {R. H. Coverley - Production Engineer} /VS. {J. Vickers} c.c. RHS. c.c. Rm. {William Robotham - Chief Engineer} c.c. Rm {William Robotham - Chief Engineer} /Swdl {Len H. Swindell} 1124 Files BY.2/G.10.2.38. CYLINDER LINER MATERIAL. I am satisfied with the cylinder liner material (high phosphorous type)referred to in RHC {R. H. Coverley - Production Engineer} /VS. {J. Vickers} 2/JT.7.2.38. and covered in regard to :- (a). Analysis. (b). Structure. (c). Hardness. in Laboratory report H1/EJW.6/JN.5.2.38. I would suggest you run off half a gross of these, and have them inspected and then machined to satisfy ourselves that we can obtain the product as per sample regularly, when I would on completion be prepared to issue instructions to make the liners at our Works. BY. {R.W. Bailey - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).