The fitting of an exhaust heated carburetter for a Phantom II.
| Identifier | ExFiles\Box 13\3\ 03-page129 | |
| Date | 5th November 1929 | |
| W/s. {Derby Works / Sales} C. Hs. {Lord Ernest Hives - Chair} O. {Mr Oldham} G. {Mr Griffiths - Chief Accountant / Mr Gnapp} +7080. BY {R.W. Bailey - Chief Engineer} /Cgh {W Clough} 4/G.5.11.29. re EXHAUST HEATED CARBURETTER FOR PHANTOM 11. With reference to Whr {Mr Wheeler} 3/MA.1.11.29. there should be no difficulty in R.R.A.I. fitting the new parts for the exhaust heated induction bend above the carburetter. The final scheme has not yet, however, been decided upon, therefore we are unable to give the Estimating Department full information, but the cost of the parts cannot be a serious matter as it is merely a question of supplying a new jacketed bend and coupling up same to the exhaust system. [STAMP] RECEIVED NOV 5 1929 BY {R.W. Bailey - Chief Engineer} /Cgh. {W Clough} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).