Continued analysis of a brake mechanism, proposing a mechanical stop to prevent excessive movement and slackening of the front brake ropes.
| Identifier | ExFiles\Box 67\1\ scan0059 | |
| Date | 19th February 1927 guessed | |
| contd :- -2- The trouble did not occur on 'V' series because by good fortune the jaw of the rod from r. {Sir Henry Royce} to the front brake equaliser shaft provided a stop by toggling. It is no use putting a stop on the T. piece so- because the rear pull off springs are not strong enough to overcome the friction and move the swinging link unless they have to assist them the 2-1 leverage provided when the whole T. piece pivots about r. {Sir Henry Royce} STOP Therefore in order to make the swinging link function and get the benefit of the friction for reducing brake thumps we must have a stop which will prevent the front brake ropes slacking off through excessive movement of point r. {Sir Henry Royce} on the T. piece. Hs {Lord Ernest Hives - Chair} /Rn. {Mr Robinson} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).