Parts list and instructions for fitting a Clayton Interior Heater to a Phantom II Chassis.
| Identifier | ExFiles\Box 137\1\ scan0148 | |
| Date | 5th November 1932 | |
| X4300 TO RHC. {R. H. Coverley - Production Engineer} c. Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} BY {R.W. Bailey - Chief Engineer} /CS1/EH.5.11.32. Re Phantom II Chassis suitable for fitting Clayton Interior Heater. Cylinder - Section 5050. Water Pump - Section 5160. Please receive herewith blue prints of the following parts detailed to R.R.Scheme 271. Section 5050. E.83574 Adaptor - Water Outlet Tap Section 5160. E.83575 Water Pump End Cover Will you please instruct one set of the above, together with the following parts. E.75427 Washer - Cylinder Block 1 off. U.657 Tap 2 " U.658 Sleeve - Spring 4 " U.737 Tap Body 2 " E.21572 Spring 2 " T.1404 Union Nut 2 " E.3895 Union Nipple 2 " G.78904 Washer 2 " K.4009 Nut - Tap 2 " K.4602 Split Pin 2 " Remainder of parts to LOP.E.78949 and E.77661 respectively. The above is in accordance with memos' Hn {F. C. Honeyman - Retail orders} 25/I/20.10.32. and Hs {Lord Ernest Hives - Chair} /Rm {William Robotham - Chief Engineer} 4/KT.28.10.32. i.e. connections etc. for fitting Clayton Interior Heater. R.R.Scheme 271 Connections on Engine for Clayton Interior Heater. LID {A. J. Lidsey} BY {R.W. Bailey - Chief Engineer} /CS. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).