Request to grind a rocker shaft to test a different roller cage for the Phantom III steering.
| Identifier | ExFiles\Box 95\1\ scan0237 | |
| Date | 12th November 1935 | |
| X350 Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} E.7/HP.12.11.35. Phantom 3 Steering. Referring to the above, it would be a great advantage if we could use the roller cage F.87751, and this will almost go over the diameter of rocker shaft shown on HS. {Lord Ernest Hives - Chair} 2071. We should, therefore, like you to grind one of your rocker shafts of this number down to 1.3 diameter, and try it on a car. If the result is favourable we shall be able to use the desired rocker cage. E. {Mr Elliott - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).