The optimal pipe size for extra cylinder lubrication on a 40/50 HP chassis.
| Identifier | ExFiles\Box 65\4\ scan0390 | |
| Date | 22th January 1930 | |
| x8050. BY. {R.W. Bailey - Chief Engineer} From HS {Lord Ernest Hives - Chair} /Rn. {Mr Robinson} HS {Lord Ernest Hives - Chair} /Rn. {Mr Robinson} 3/MJ.22.1.30. 40/50 HP. CHASSIS - EXTRA CYLINDER LUBRICATION. With reference to By4/G22.1.30. We think that the biggest pipe which we could use for the extra oil to the cylinders is 5/16" becuase E. {Mr Elliott - Chief Engineer} was most anxious to prevent the fitting becoming unsightly. This would give us 100% greater area. The alternative would be a .250 pipe which gives us a 50% greater area than the 3/16" at present used. We used a 5/16" pipe on our original tests and should like a scheme using this size as being about what we shall probably want. HS {Lord Ernest Hives - Chair} /Rn. {Mr Robinson} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).