Scheme for the automatic lubrication of the Phantom II clutch spigot bearing from the gearbox.
| Identifier | WestWitteringFiles\T\March1929-December1929\ Scan241 | |
| Date | 6th November 1929 | |
| BY. {R.W. Bailey - Chief Engineer} FROM DA. {Bernard Day - Chassis Design} Copy to SG. {Arthur F. Sidgreaves - MD} Copy to HS. {Lord Ernest Hives - Chair} ORIGINAL DA {Bernard Day - Chassis Design} 2/M6.11.29. x7980 x7480 x872 PHANTOM 11. LUBRICATION OF CLUTCH SPIGOT BEARING. Herewith we send N. scheme 2973. shewing a method of lubricating the clutch spigot bearing automatically from the gearbox. There is a slight modification to the gearbox 1st. motion shaft, and there is also a boss on the gearbox casting to be added. It is suggested that care should be taken to make oiltight joints between the clutchdriven member and the housings of the universal joint. There is a slight modification to the shoes and drum of the clutch brake. DA. {Bernard Day - Chassis Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).