Requesting the instruction of one set of parts for the Bentley 111 chassis cross steering to correct geometry errors.
| Identifier | ExFiles\Box 100\2\ scan0037 | |
| Date | 8th March 1938 | |
| HPS {Horace Percy Smith - Experimental Factory Mgr} c. Rm {William Robotham - Chief Engineer} /FJH. {Fred J. Hardy - Chief Dev. Engineer} 200b BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} 15/G.8.3.38. 450, BENTLEY 111. CHASSIS. CROSS STEERING - SECTION 7041. Please receive herewith two blueprints of each of the following :- Ex.S.563 Ball End Pin - 2 off. Ex.S.564 Washer for Ball Pin 2 off. These have been detailed at the request of memo Rm {William Robotham - Chief Engineer} /FJH. {Fred J. Hardy - Chief Dev. Engineer} 1/MH. {M. Huckerby} 8.3.38. to enable the cross steering tube to be lowered .500 at the centre ball joint, to over-come geometry errors in the front suspension. These pieces are required urgently for fitting to the B.111 car. Kindly instruct one set. Ald {F. Allwood - Experimental Design} BY {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).