Instructions and parts list for a carburetter modification on a 20HP Chassis.
| Identifier | ExFiles\Box 5\4\ 04-page180 | |
| Date | 22th April 1927 | |
| c. to Hs. {Lord Ernest Hives - Chair} X5080 BY {R.W. Bailey - Chief Engineer} /CS7/DB. {Donald Bastow - Suspensions} 22.4.27. Re 20HP Chassis - Carburetter - Sec:5080. We send you herewith two blueprints off the following:- E.54392 - Carb:Spray Chamber which replaces E.52813. Will you please instruct up one off this part together with one set of the following:- E.51172 - Upper Casing.(Air Inlet). 1 off. E.51173 - Lower Casing.(Air Inlet). 1 off. E.51220 - Air inlet. 1 off. E.51211 - Stud.(Air Inlet). 1 off. E.51213 - Stud.(Air Inlet to Body). 1 off. E.50744 - Stud.(Air Inlet to Spray Chamber). 2 off. K.9006 - F.S.Washer. 4 off. K.4005 - Nut. 5 off. remaining parts to std: L.O.P. Please note that alteration No.11932/E on E.51173 should be incorporated for this experiment. The above is in accordance with Mr Hives request to fit air intake as shown on Lec.1457 to std: carburetter, and completes instructions for this experiment. BY {R.W. Bailey - Chief Engineer} /CS. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).