Modifications for a Long C.F. Clutch on chassis 6.B.IV.
| Identifier | ExFiles\Box 83\2\ scan0335 | |
| Date | 2nd May 1938 | |
| To HPS. {Horace Percy Smith - Experimental Factory Mgr} from Rm {William Robotham - Chief Engineer} /NRC. {N. R. Chandler} c. HPS {Horace Percy Smith - Experimental Factory Mgr} /FS. {F. Steele} c. Rm {William Robotham - Chief Engineer} /FD. {Frank Dodd - Bodies} γ 200a Rm {William Robotham - Chief Engineer} /NRC. {N. R. Chandler} 4/MH. {M. Huckerby} 2.5.38. UNIT B.24 CHASSIS 6.B.IV. LONG C.F.CLUTCH. The above car is now in the shop. Please remove flywheel and drill and tap to Rm. {William Robotham - Chief Engineer} 510 herewith. Make 5 Set Screws Rm. {William Robotham - Chief Engineer} 512 and 1 Rm. {William Robotham - Chief Engineer} 511. Fit Long clutch with centrifugal assistance and balance by drilling clutch cover as necessary. Rm {William Robotham - Chief Engineer} /FJH. {Fred J. Hardy - Chief Dev. Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).