From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Provision of clips and a hole for the radiator and dash wiring on the Wraith III.
| Identifier | ExFiles\Box 9\3\ 03-page037 | |
| Date | 25th June 1937 | |
| SECRET. Copy to [REDACTED] Hm{Capt. W. Hallam - Head Repairs}/Ltd. 640 [Signature] E/EV.{Ivan Evernden - coachwork}R/M.25.6.37. WRAITH III. RADIATOR AND DASH WIRING. We agree that we have not provided any clips for the wires which run up to the headlamps and horn inside the radiator yoke and shown on W.Sch.5069. We would be glad if you would provide a hole in the yoke at the base using a Phantom III. rubber ring to prevent chafing. As far as we can see the Phantom III. clip can be used on the lower bolts of the headlamp tube fixing to the yoke piece, and the same clip can be applied to the yoke piece immediately below the wing stay fixing to hold the wires away from the bottom tank. We would be glad if you would kindly arrange to add these parts to the details without a scheme, as the Experimental Dept. are pressing for instructions. E/EV.{Ivan Evernden - coachwork} | ||