From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Recommendation to redesign a tool for removing valve springs.
| Identifier | ExFiles\Box 66a\2\ scan0073 | |
| Date | 17th April 1928 | |
| To BY/Cgh.{W Clough} from Hs.{Lord Ernest Hives - Chair} S8060 Hs{Lord Ernest Hives - Chair}3/LG17.4.28. RE. VALVE SPRINGS. +290 Replying to BY/Cgh{W Clough}18/G16.4.28. We are certainly in agreement that the tool which we supplied for the new valve springs should be applicable when the head is fitted to the engine. We cannot see any reason why we should supply two tools to remove valve springs. The one which the Expl: Dept: use for removing the spring with the head in position can be just as well used with the head off the engine. Our recommendation therefore is that we should change the design of the tool so that it can be used whether the head is on or off. Hs.{Lord Ernest Hives - Chair} | ||