From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Goshawk 11 chassis bump test report detailing multiple failures of the rear leaf spring and a front support bracket.
| Identifier | Morton\M1.4\ img002 | |
| Date | 15th November 1921 | |
| To R.{Sir Henry Royce} from Hs.{Lord Ernest Hives - Chair} c.c. to CJ. c.c. to H.{Arthur M. Hanbury - Head Complaints} c.c. to Du. c.c. to HY.{Tom Haldenby - Plant Engineer} c.c. to SF. c.c. to WOR.{Arthur Wormald - General Works Manager} ORIGINAL. GOSHAWK 11. BUMP TEST. X4219 X4262 We have now bumped the rear of the Goshawk chassis for 48 hours. During that time we have had the following failures:- Top leaf rear spring broken after 15¼ hours. " " " " " 19¼ hours. " " " " " 23¼ hours! Front support bracket for rear spring O.S. after 48 hours. We are sending samples of the broken pieces to R.{Sir Henry Royce} As regards the broken spring bracket, this is another case where fracture has occurred close up to the brazing. Experience so far with brazing on Goshawk 11. has not been very successful on parts which are highly stressed. As regards the failures of the top leaf of the rear springs. We think that* if this happened on the road it might be very serious because as the rear springs act as radius rods,* if one of these broke, the rear axle would steer the car off the road. We recommend we look into the question of whether it is possible to fit a stop on the shackle similar to what we use on the front spring in order to avoid excessive movement of the axle in case of a spring failure. The failures of the springs have all occurred where the clip is placed. We are running the springs now with this clip removed to see whether it will make any difference. Hs.{Lord Ernest Hives - Chair} | ||