Modifications to dynamo armatures for augmented output at higher speeds.
| Identifier | ExFiles\Box 68\4\ scan0261 | |
| Date | 23th April 1928 | |
| X5663 To BY. {R.W. Bailey - Chief Engineer} from EFC. {E. Fowler Clarke - Electrical Engineer} c. BY {R.W. Bailey - Chief Engineer} /RD. EFC {E. Fowler Clarke - Electrical Engineer} 1/T23.4.28. DYNAMO FOR AUGMENTED OUTPUT AT THE HIGHER SPEEDS. X8664 With reference to our notes EFC {E. Fowler Clarke - Electrical Engineer} 4/T28.3.28 and EFC {E. Fowler Clarke - Electrical Engineer} 3/T28.3.28 dealing respectively with 26 slot armatures for the 20 H.P. and 40/50 H.P., will you please note that in view of R2/M18.4.28 it will be necessary to cancel these instructions for the time being. We should be pleased if Mr. Davis could make a rough drawing of one slot of 28 slots in which the number of turns per coil has been altered from 4 to 3, and the slot less deep and wider accordingly. We considered this case before finally arriving at the 26 slots, and decided that it was rather unsatisfactory. We would probably send a copy of Mr. Davis' rough lay-out to R. {Sir Henry Royce} for his comments. EFC. {E. Fowler Clarke - Electrical Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).