From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Test report detailing B.M.E.P. values at different R.P.M. for a modified camshaft and outlining future tests.
| Identifier | ExFiles\Box 5a\5\ 05-page233 | |
| Date | 1st November 1929 | |
| -2- speeds of 3000 and 2500 R.P.M. At lower speeds there was no difference. It will be remembered that the camshaft had the Std. cam forms except that the inlet had a 14° dwell inserted and the exhaust a 6° dwell. The angle between the cams was 120°. The following is the B.M.E.P. obtained on this occasion which, except for between 3000 and 2500 R.P.M., was identical for each tappet clearance. R.P.M. B.M.E.P. 3000 130.4 2750 125.3 2500 124 2250 123.3 2000 122 1750 119.4 1500 117.8 1250 115.6 1000 114.2 750 109.5 We can however, easily check this again on our present 116° camshaft on 'Minx' engine. We will next test the 116° camshaft with the compression ratio increased to restore the power to the same as the 116° camshaft at the low speeds and test for roughness and detonation. HS{Lord Ernest Hives - Chair}/ACL. | ||