From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Drawing for an adjusting bellows for a filler tube.
| Identifier | ExFiles\Box 88\5\ scan0133 | |
| Date | 21th June 1935 | |
| R.R.773.10M(X7762)-11-2-35)N&G.LTD OPERATION MACHINE TOOL TOOL Nº NP FB2206 9 CONVOLUTIONS EQUALLY SPACED 3.250 2.500 I/D EACH END +5/- 2.500 I/D OF CONVOLUTIONS .550 +25/- A 3.500 DIMENSION A MAXIMUM 4.000 MINIMUM 3.000 DESIGN DRAWING OFFICE ROLLS-ROYCE, LTD PRINT ROOM 21 JUN 1935 DERBY GUAGE OF MATERIAL LEFT TO DISCRETION OF MAKERS BELLOWS USED AS STATIONARY JOINT SUBJECT TO SLIGHT VIBRATION PETROL PASSES INSIDE BELLOWS Lec 9520. REPLACE ALL COPIES TO EXP PATT WORKS FORGE T.O S.R. D.O R.{Sir Henry Royce} H.O AMERICA COST DRAWN TRACED CHECKED APPROVED LIMITS O.K. DATE 18-6-35 USED ON NºOFF SECTION 26/10/37 7080 SCALE 1/1 HEAT TREAT BRINELL TITLE: ADJUSTING BELLOWS FOR FILLER TUBE MATERIAL: STANTON SOFT BRASS. SPECº Nº: PACKLESS GLAND Co. MACHINE ALL OVER OR WHERE MARKED THUS | ||