From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of standardisation sheets in circulation for various vehicle components.
| Identifier | ExFiles\Box 154a\3\ scan0156 | |
| Date | 6th November 1934 | |
| -2- BY {R.W. Bailey - Chief Engineer} /Mtn6/N.6.11.34 Cont'd. {John DeLooze - Company Secretary} The following Standardisation Sheets are in course of circulation :- Ransome & Marles rear axle pinion thrust race. Improved starter dogs. Terminal nuts and spring washers in place of spring clips on sparking plugs. Starter motor magnet poles made in 'Sankey's' Lohys iron. Sheet metal floorboards. Lightened type A.T.Speedometer with larger trip and total mileage figures. Small dynamo. Titeflex all metal flexible tube for petrol connection, between the filler and carburetter. Headlamp pillars fitted outside frame. Rubber mounting crossmember at rear of engine. Aerolite pistons. Pedals with rubber pads vulcanised direct to pedal plate. Moved back battery crossmember. Propeller shaft damping device. Larger inlet valves and smaller exhaust valves. } For use with cast iron Cylinder head in cast iron. } cylinder head and for special cases only. 58 m {Mr Moon / Mr Moore} /m Harrison radiator matrix. Front road springs with improved clips. Starter motor with reduction gear. BY {R.W. Bailey - Chief Engineer} /Mtn. | ||