Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Investigations into engine booms on the Phantom II model, including tests with a stiffer flywheel.

Identifier  ExFiles\Box 13\7\  07-page092
Date  2nd March 1931
  
X7300

To R.{Sir Henry Royce} From Hs{Lord Ernest Hives - Chair}/Gry.{Shadwell Grylls}
c. to Sr. Wor.{Arthur Wormald - General Works Manager}
c. to E.{Mr Elliott - Chief Engineer} Da.{Bernard Day - Chassis Design}
c. to By.{R.W. Bailey - Chief Engineer}

Hs{Lord Ernest Hives - Chair}/Gry.{Shadwell Grylls}15/KT.2.3.31.

x634
y7300

BOOMS ON P.II.

Replying to your R.3/M23.2.31., we are going to try a stiffer flywheel back plate and crankshaft flange as soon as possible. Before receiving the LeC. scheme for this in conjunction with 4 balance weights, we decided to do it to the accompanying Hs.{Lord Ernest Hives - Chair} drawings, parts for which are now being made. We shall therefore try a stiffer flywheel by itself and also fixed to a stiffened crankshaft flange.

We have carried out some tests to your suggestion of using an Electric Motor with an out-of-balance shaft to find the periodicity of the boom at 30 M.P.H. We did this on the road by driving the car continuously at 30 M.P.H. in 2nd gear and then running up a 30 HP. starter motor with an out-of-balance mass on its shaft, until we got a beat note with the car's boom. These beat notes occurred at 1 1/2 times and twice engine speed. A considerable difference of opinion exists as to which was the more pronounced.

Hs{Lord Ernest Hives - Chair}/Gry.{Shadwell Grylls}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙