From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Modifications to the Bentley III frame and the re-issue of drawing LeC.5456.
| Identifier | ExFiles\Box 99\2\ scan0010 | |
| Date | 2nd February 1937 | |
| SECRET. E/EV.{Ivan Evernden - coachwork}7/MN.2.2.37. To BY.{R.W. Bailey - Chief Engineer} Copy to Per [Redacted] RHC{R. H. Coverley - Production Engineer} [Redacted] REG [Redacted] EM/FLS.{F. Llewellyn Smith - Frames} -------------------- Bentley III Frame. -------------------- We informed you verbally through DY{F R Danby}/Cgh{W Clough} that further modifications were necessary to LeC.5456 showing the side members of the frame for Bentley III as the result of a last minute visit by Messrs.Rubery Owen, during which they rather contradicted their previous statements of the possibility of fitting together the two side channels. We ourselves had always imagined this to be an unlikely scheme but at the outset they said they could do it and were doing it. They now ask us to revert to the Hillman Minx section in which the top welding flange is horizontal and the lower welding flange vertical. We have altered LeC.5456 and re-issue it to you herewith. At the same time this modification has enabled us to widen the back of the frame without spreading the road spring centres. The thickness of the frame side members is intended to be .080" SWG.14. Would you kindly issue the necessary prints, withdrawing all existing prints bearing this number. Ev.{Ivan Evernden - coachwork} Att:LeC.5456. [Handwritten Notes] 200B 427 | ||