From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Numbered list of assembly instructions, page 2, for a mechanical component.
| Identifier | ExFiles\Box 48\4\ Scan009 | |
| Date | 31th January 1921 guessed | |
| -2- (18) Press in bearing for lower shaft. (19) Put spring plungers and housing in position in the top sides of box. (20) Lock gears by pushing (handwritten: meshing) reverse and forward gear wheels, tighten up nut on lower shaft bolt, and fix. (21) Press in 27 tooth wheel with its ball bearing. (22) Put on front bearing cover, and shaft nut and washer etc. bolt up. (23) Put in all remaining plugs and screws. (24) Put on speedometer drive complete. (25) Put on change speed lever tower complete. ----------- [Watermark: DICKINSON BOND 1804] | ||