From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposed changes to the Bensport brake linkage layout and pedal shaft bosses.
| Identifier | ExFiles\Box 179b\1\ img308 | |
| Date | 2nd February 1933 | |
| BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design} ORIGINAL. C. to SC. WOP. HS.{Lord Ernest Hives - Chair} H.{Arthur M. Hanbury - Head Complaints} - BENSPORT BRAKE LINKAGE. We send herewith N. sch. 3684. - quarter sketchof the brake linkage layout embodying the proposed inverted levers on the foot brake linkage, with a straight crossmember under the transmission. We believe you are already acquainted with most of this proposal, but on the question of the connection between the pedal and the gearbox countershaft we now make a further suggestion that two pedal shaft bosses should be cast on the 25HP. clutch pit, one in the standard position for the 25HP., and the other lower down for Bensport. It will be recalled that the original 25HP. had this feature. As compared with the present push rod arrangement we obtain a better proportioned pedal, lighter load on the linkage and bearings, and better geometry. We suggest the clutch pit could be added to those pieces held up from production until the boss has been added to the pattern. DA.{Bernard Day - Chassis Design} | ||