Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposal to modify an eight-cylinder distributor for use on a four-cylinder mockup engine.

Identifier  ExFiles\Box 168\3\  img139
Date  13th April 1939
  
6119
993

o.c. [REDACTED]
o.{Mr Oldham} Rn{Mr Robinson}/BC.
[REDACTED]
[REDACTED]

BY/RD.7/B.13.4.39.

FOUR CYLINDER "MOCKUP"

IGNITION DISTRIBUTOR. SECTION ALSO.

We propose to use the eight cylinder distributor to LOP. RR.2292 already instructed, for the above "mockup" engine.

Two parts will require modification.

The Distributor Head which will require the firing order for eight cylinders removing, and the new firing order for four cylinders engraving thereon.

The Driving Sleeve for the base of this distributor to pick up on the drive of the R.60 engine which is being used for the four cylinder "mockup".

Ignition wires should be fitted to the un-numbered terminals of the distributor head and suitably earthed on the engine.

Blueprints of the new parts are attached herewith :-

DB.{Donald Bastow - Suspensions}2355 - Driving Sleeve.
DB.{Donald Bastow - Suspensions}2356 - Distributor Head.

1 set of blueprints herewith to Roy{Sir Henry Royce}/Lee.

BY/RD.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙