Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of parts no longer required and instructions regarding modifications to the 3rd and 4th crossmembers.

Identifier  ExFiles\Box 14\8\  Scan346
Date  28th July 1933
  
-2-
BY/HEB{H. Biraben}16/M.28.7.33.-Contd-

The following parts will not be required.-

K.A1110 Bolt(End Socket(3rd Crossmember). 4 off.
K.{Mr Kilner} 1113 " (Rear Spring Anchor Bracket). 8 "
K.{Mr Kilner} 9010 Washer(End Socket(3rd Crossmember Frame). 12 "
K.{Mr Kilner} 4010 Nut ( " " " ). 12 "
K.{Mr Kilner} 4847 Taper Pin(End Socket)3rd Crossmember. 6 "
F.80742 End Bracket(3rd Crossmember). 2 "
F.72515 Stud(Brake Carrier Bracket). 4 "
F.80743 Boss(Brake Carrier Lever). 4 "
F.80744 Washer( " " Stud). 4 "
F.80747 Bush in 3rd Crossmember. 1 "
F.80874 " (Silencer Support). 2 "
K.{Mr Kilner} 9008 Washer(Brake Carrier Bracket Stud). 4 "
K.{Mr Kilner} 4008 Nut ( " " " ). 4 "
F.80745 Brazing Arrgt. 3rd Crossmember. 1 "

Kindly note that in accordance with memo'
BY/3820/M.20.7.33, we have not made allowance for modified Exhaust System, Battery Suspension, Wiring, Oil Pipes etc.,

We also attach two Blue Prints of:-

F.85442 Lay-Out of Sheet Metal 3rd Crossmember.

These instructions do not entail all modifications necessary to complete these Schemes, as the 4th Crossmember is moved forward approximately 4.000 and this requires laying out to clear the Equalisers on the 5th Crossmember. We will issue instructions for this as soon as possible, together with modified Frame Drilling.

In the meantime, the above parts could be produced.

BY/HEB{H. Biraben} .1482
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙