Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Request to produce a modified Distribution Board and Cutout for a 20 HP Chassis 18-GIV, listing the required additional parts.

Identifier  ExFiles\Box 163\6\  img034
Date  16th April 1930
  
X6016
COPY.
RHC.{R. H. Coverley - Production Engineer}
By/RD4/W16.4.30.

20 HP. Chassis 18-GIV.
Distribution Board & Cutout.
Sec : 8170. 'D' scheme 315.

Will you please put in hand one Distribution Board and Cutout to our LOP. D.51907. This is really the standard board modified to take the Half Charge Switching scheme by the addition of the following parts, Blue Prints of which you have already had :-

D.72627 Distribution Board base. 1 off.
D.72628 Terminal, dynamo field. 1 off.
D.72629 Clip, field fuse. 1 off.
D.72632 Coil for cutout. 1 off.

Will you please put one set in hand. The diagrams of Connections D.51911/12 are not yet ready but this does not stop the car being tested.

By/RD.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙