From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter from Adamant Engineering Company regarding the correct size of steering gear and enclosed drawings.
| Identifier | ExFiles\Box 28\2\ Scan119 | |
| Date | 23th January 1933 guessed | |
| Continuation sheet No. 1. Messrs. Rolls-Royce, Limited. From the information you have given us regarding the weight on the front axle of this car, it would appear to us that our J type of steering, as shown on the general arrangement drawing enclosed herewith, GA 2450, would be the correct size of steering to use. We have therefore got out a drawing, MGA{M. G. Aspley} 20212, a blue print of which we enclose herewith, brought into line with your requirements. We find that we have not full particulars with regard to the drop arm, and in one or two other directions also, but we think perhaps this drawing may be useful to you, and will enable you to check up as to the suitability of this gear for the chassis. We shall look forward with much interest to hearing further from you on this subject, and assuring you of our best attention at all times, We are, Yours faithfully, for ADAMANT ENGINEERING COMPANY LIMITED. [Illegible Signature] Director. 2 drawings enclosed. | ||