From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification of parts required to bring Wraith car 28.G.V1 up-to-date.
| Identifier | ExFiles\Box 108\2\ scan0021 | |
| Date | 18th February 1938 | |
| To HPS.{Horace Percy Smith - Experimental Factory Mgr} from Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager} 600 Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager}1/AP.18.2.38 28.G.V1. Herewith specification of parts required to bring Wraith car 28.G.V1. up-to-date. 1. Fit engine unit No.8. 2. Reline brakes with Ferodo M.R.J. Otherwise same specification as 29.G.V1. 3. Remove all shock absorbers and hand to W.Bell for modification to Rm{William Robotham - Chief Engineer}/Les's instructions. 4. Fit rear engine suspension to GCD.162. FW.1412 Rubber block. FW.1499 Gearbox crossmember 5. Fit raised engine mounting - FW.1320 Nose bearing. Ex.29724 Supp. arch. Ex.29719 Bracket on frame. Ex.29678 Supp. plate. Ex.29679 Packing. 6. Torque reaction damper SCD.279. FW.1497 Anchor bracket. FW.1498 Bracket on crankcase. 7. FCD.100 Rear Bump Buffer. FW.1300 Bush. FW.1301 Casing. FW.1303 Axle Buffer. 8. FCD.91 Rear spring Silentbloc bush. FW.1342 Bush. FW.1370 Anchor. 9. FCD.106 Strengthened wheelarch supp. brackets. FW.1433/4 Wheelarch brackets - rear. FW.1455/6 " - front. continued | ||