Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design changes and specifications for the Bentcroft radiator.

Identifier  ExFiles\Box 179b\1\  img110
Date  10th October 1932
  
FROM DA.{Bernard Day - Chassis Design}
C. to MR. HS.{Lord Ernest Hives - Chair}
BENTCROFT RADIATOR.
DA{Bernard Day - Chassis Design}3/AS.10.10.32.
X4553.

Herewith we send N. sch. 3561, showing the bottom of this radiator, including the suspension in the frame.

It will be noticed that the radiator has been moved forward an additional .6" making a total move forward of 1.3", compared with the position shown on N. sch. 3502.

The shutters follow the construction of Peregrine, and are intended to be mild steel, chromium plated.

There is a question of the material of the outer shell. We wish it to be finished chromium plated. We believe the Bentley shell is of nickel.

It will be noticed that we have introduced a cross member underneath the radiator, and this will have to be taken down to remove the supercharger. We shall be glad to have E's remarks, if any.

We understand from E.{Mr Elliott - Chief Engineer} that if a Roots blower should be used it will go into the space provided without alteration.

The top of the tank is following on a later drawing.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙