From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Wiring alterations for the Goshawk 11 magneto and a redesigned securing clip.
| Identifier | ExFiles\Box 45\3\ Scan193 | |
| Date | 5th October 1922 | |
| TO BY FROM E.{Mr Elliott - Chief Engineer} X4075 E1/M5.10.22. c. to GJ. ~~WOR.{Arthur Wormald - General Works Manager}~~ c. to HB.{C. E. Harcombe} ~~FPG.~~ c. to RT. X4075 GOSHAWK 11. - WIRING FOR MAGNETO. We send you herewith drawing No. LeC 1634 showing alterations to the wiring conduits to allow for the carrying of the magneto earthing wire. These alterations should be permanently adopted on Goshawk production, (handwritten 'chassis' is written above 'Goshawk production') but the magneto wire should not be put in on every chassis. It is required only on those where a magneto is specified by the Sales department. This drawing also shows a modification to the clip which secures the vertical conduits on the front face of the dash. This clip has been redesigned so as to strengthen the section opposite the clamping bolt. This latter modification should be adopted as soon as possible as the clips on the Goshawk at WW. have collapsed. E.{Mr Elliott - Chief Engineer} [Stamp reads: RECEIVED 7 OCT 1922] | ||