Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Necessity of a front axle bump test for the Vulture chassis before any speed testing.

Identifier  ExFiles\Box 123\3\  scan0083
Date  1st January 1934
  
To Hs.{Lord Ernest Hives - Chair} from E.{Mr Elliott - Chief Engineer}

c. Sg.{Arthur F. Sidgreaves - MD} Wor.{Arthur Wormald - General Works Manager} By.{R.W. Bailey - Chief Engineer}

re Testing Vulture Chassis.

Before we allow anybody to do any speed on the Vulture chassis, I am definitely of the opinion that we ought to have an equivalent bump test to make certain that the front axle will not fail on the road.

It would be possible to rig up a J.3. front axle and pivots on the Phantom II bump chassis, or alternatively the equivalent weight of a Phantom II engine on the 20-HP bump chassis (which has a similar front axle to Vulture) with the same relative position of engine and axle.

It is realised that we took a somewhat similar risk when we put the Bentley engine into what was practically a Peregrine chassis, but in the case of the Vulture the proportion of increased weight is considerably more, and the engine is further forward.

E.{Mr Elliott - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙